Table of Contents
Advertisement
Testing
17. To test that the speaker volume in your head-
set is working and set at a comfortable level, click
once on the speaker icon in the system tray. Click
on the volume adjustment slider for a system
sound. Adjust the volume to a level that is com-
fortable for you. The Multimedia Properties win-
dow allows you to make advanced adjustments; go
to the Volume Controls section of this manual.
18. To test the microphone, use the sound recording utility that
comes with Windows. Go to Start/Programs/Accessories/
Entertainment/Sound Recorder.
19. Position the microphone
approximately one finger width
away from your lower lip.
20. Click the red
Record button and
record a voice file.
Click the Stop but-
ton when you are
done. Replay the
file by clicking the
Play button. If you
hear your voice,
recording is suc-
cessful and the
microphone is
working properly.
If you cannot hear your voice, go to the Frequently Asked
Questions section of this manual.
Warning! Although GN Netcom professional headsets have built-
in hearing protection, computers are capable of generating
extremely loud sound bursts such as modem connections. Always
1/2"
(12 mm)
check the volume level before putting on the headset.
Play
Stop Record
Advertisement
Table of Contents
