Outline; Interface; Terminal; External Controller Connector - JVC D-ILA DLA-RS46 Specifications

1 Outline

This specification describes how to control the D-ILA projector * by using an external controller through the RS-232C interface.
* DLA-X35/X3800/RS46, DLA-RS4810, DLA-X55R/XC5800R/RS48, DLA-X75R/X7800R/RS56, and DLA-X95R/XC9800R/RS66

2 Interface

2.1 Terminal

D-SUB 9pin Male terminal
Pin No. Name
1 NC
2 RXD
3 TXD
4 NC
5 GND

2.2 External Controller Connector

Serial port connector (RS-232C)
For type of the connector and pin layout, please refer to each controller's specifications.

2.3 Communication Line

This control system uses RXD (receive data), TXD(transmit data) and GND line. Use an RS-232C crossover cable to connect the
projector to the external controller like as PC.
Pin No. Name
6 NC
7 NC
8 NC
9 NC
4 / 61
1 Outline
PJ04030102B