Skoda DANCE Quick Start Manual page 9

Activation of the AM waveband
The AM waveband is activated when pressing the button
button several times, you can move between the memory levels AM1, AM2 and
AM-AS.
The process of searching for and storing the radio stations
Manual search
– Set the frequency of the desired radio station by pressing the button
or .
 
Automatic station finding SEEK
– The radio searches for the next radio station in the selected waveband
by pressing the button or

Store station
– After selecting the radio station, hold the station key
should be stored until it briefly switches to mute and a brief signal
sounds.
Automatic station finding with storing the radio stations
– Press the button . An automatic station finding is started during
AS
which the 6 stations with the strongest signal are stored. The display
STORING appears on the display and the volume is reduced.
When storing the radio stations on the station keys
the desired radio station by pressing a station key
Note
The stored radio stations are updated and stored once again by repetitively
pressing the button .
AS
Ofrecido por www.electromanuales.com
. By pressing the
AM
.

A
, on which it
12
A
is finished, you can call up
12
A
.
12
Radio text
Certain radio stations transmit additional text information - called radio
text.
– The information of the radio text is displayed by pressing the button
.
INFO
Note
•
The text information must not be available to all radio stations.
•
Depending upon the quality of the received signal, the radio needs a specific
time, in order to correctly read all the illustrated characters.
•
If the selected radio station does not transmit any radio text, the message TEXT
UNAVAILABLE appears.
Traffic reports
Activating and deactivating the traffic information
, TP appears in the display. If a set radio station does not
Press the button TP
transmit a traffic report, the radio searches for a station which transmits the traffic
report. TP SEEK is displayed on the display.
If no radio station which transmits the traffic reports is found, NO INFO is shown on
the display.
An incoming traffic report automatically interrupts the CD play function or listening
to a radio station, which at that moment is not transmitting a traffic report. TRAFFIC
is displayed on the display. At the end of the traffic report, the radio automatically
returns to the original play function.
If you wish to deactivate the traffic information, press once again the button
goes out on the display.
Radio 7
, TP
TP