Installation; Tank And Engine Options - Navman FUEL 3100 Installation And Operation Manual

4 Installation

Correct installation is critical to the performance
of the unit. It is vital to read the entire
installation section of this manual, and the
documentation that comes with any optional
other parts, before starting the installation.
Single fuel tank, single engine
Single fuel tank, twin engines (requires twin engine kit)
Twin fuel tanks, twin engines (requires twin engine kit)

4-1 Tank and engine options

There are three options for the FUEL 3100 and
the DIESEL 3200.
A FUEL 3100 uses one sensor to measure fuel
consumption. The DIESEL 3200 uses two
sensors to measure fuel consumption, a sensor
in the supply line and a sensor in the return line
(see section 1-1).
To configure the unit for different tank and
engine options, set dUAL and motor in the
16
Fuel tank
Flow sensor
Engine
Fuel tank
Flow sensor
Port engine
Port fuel tank
Flow sensor
Port engine
NAVMAN
For more information, refer to the installation
instructions supplied with the sensor, or
consult your Navman dealer.
Flow sensor
Starboard engine
Starboard fuel tank
Flow sensor
Starboard engine
FUEL menu and for twin motors identify each
engine in the dSL SEn menu by alternately
removing power from the flow sensors as
described
in this section.
Note:
Twin fuel tanks connected by an open balance
pipe should be configured as a single fuel tank.
FUEL 3100 / DIESEL 3200 Installation and Operation Manual
Single fuel
consumption
measurement
Two fuel
consumption
measurements
Two fuel
consumption
measurements