Installation; What Comes With The Fuel 3100 - Navman FUEL 3100 Installation And Operation Manual

5 Installation

Warnings
1. NAVMAN fuel flow transducers are NOT
suited for EFI (electronic fuel injection) engines
with fuel return lines to the tank.
2. NAVMAN fuel flow transducers are designed
for use with marine gasoline inboard and
outboard engines. They must NOT be used with
Diesel engines.
Correct installation is critical to the performance of
the unit. It is vital to read the entire installation section
of this manual, and the documentation that comes
with any optional other parts, before starting the
installation.
For more information, refer to the installation
instructions supplied with the transducer, or consult
your NAVMAN dealer.

5-1 What comes with the FUEL 3100?

Standard configuration
FUEL 3100 display unit
Protective cover
Fuel flow transducer and cable 8 m (26¼ ft)
2 plastic clips for the fuel flow transducer
Warranty card
Mounting template
This Installation and Operation Manual
Fuel Transducer Installation Manual
Display unit
Fuel flow transducer
and cable
FUEL 3100 Installation and Operation Manual
Protective cover
Plastic clips
FUEL 3100 options:
Additional FUEL 3100 display
unit, includes this manual (Can
use second display unit to
repeat fuel data).
FUEL 3100 twin engine
updgrade kit.
Note: Upgrades from single
engine to twin engine
applications. Comes with one
fuel transducer and 'T' connector.
The 'T' connector is marked 2
(connects to port transducer) and 3 (connects
to starboard).
FUEL 3100 speed transducer options
Available in the following ready-to-install kits:
Transom Through hull
mount speed bronze speed
transducer transducer
Note: Speed data can also be input from most other
NAVMAN products that output speed data via
NavBus or NMEA; or most other brands via NMEA.
Other options
External beepers and/or lights (see section 5-5
Power and Wiring).
For systems of several instruments, wiring and
connectors are
required (see section
5-5 Power and Wiring,
or the NavBus
Installation and
Operation Manual ).
NAVMAN's NavBus
junction box for
increased control and
simplified system
building.
Cables
4 m (13 ft) speed
transducer extension
cable.
Note: For the latest information on all options and
accessories, see www.navman.com or contact
your nearest NAVMAN dealer.
Through hull
plastic speed
transducer
NavBus junction box
(See section 5-5
Power and Wiring)
15