Table of Contents
Advertisement
Quick Installation
All connections should be made with the power turned OFF!
Note: The following pages detail each step of the installation process. Here is an
overview of the installation process:
1) Connect each A/V source to the Matrix.
2) Connect up to four IR (optional) emitter module to the Matrix.
3) Connect the CAT 5 cable to all receiving units.
4) Connect the CAT 5 cable from the receiving unit to the Amplifier Keypad.
5) Connect the A/V outputs to each receiver unit.
6) Connect an IR detector module (optional) to each Receiver unit
7) Connect the power modules to all units.
8) Apply power to the receiver unit. Power light should light up on the
keypads.
9) Finish all the rooms before powering up the Matrix.
10) Initialize the Keypad, hit the mute button first. Then bring the volume all the
way down, then all the way up. Then return the volume to normal level. You
must do this to all the Keypads.
11) System is now fully operational.
Important!
(Detailed description of the parts is on page 7)
OWI Incorporated
17141 Kingsview Ave. Carson CA 90746
Tel. 310-515-1900
www.owi-inc.com
4
Advertisement
Table of Contents
