Operating The Unit By Tv's Remote Control (Hdmi Control); Hdmi Control Function - Yamaha YSP-4300 Owner's Manual

Initial settings
HDMI1
y
1)
• Even if your TV supports the HDMI control function, some functions
may not be available. For details, refer to the manual supplied with
your TV.
• If you connect this unit to a device such as a Blu-ray disc player that
supports HDMI control via HDMI cable, you can control that device
using the HDMI control function. For details, refer to the manual
supplied with each device.
• We suggest using devices (TV, Blu-ray disc player, etc.) from the
same manufacturer.
30
En
Operating the unit by TV's remote
control (HDMI control)
What is the HDMI control function?
This unit can be operated using a TV's remote control if the TV
supports the HDMI control function and is connected to this unit
via HDMI cable (e.g. REGZA Link; some TVs excluded).
The following 6 functions are supported.
Remote control of TV (Example)
1. Turn on/off
Both the TV and this unit turn on/off at
the same time.
2. Switch input sources
• The input source for this unit switches
accordingly when the TV's input
source is switched. The input source
for this unit also switches when a
Blu-ray disc player is selected as the
input source from the TV's menu
display.
• The input source can be switched
while this unit is in standby mode.
3. Control volume
This unit's volume can be adjusted when
"HDMI AUDIO OUT" (☞p. 63) is set to
"AMP" (default).
4. Switch the audio output
device (TV or this unit)
5. HDMI signal pass-through
HDMI input signals are output from the HDMI OUT (ARC) jack. Video and
audio content from an HDMI input source are output from the TV when this
unit is in standby mode.
6. ARC function
Audio signals output from the HDMI (ARC) jack on the TV can be input to
this unit.
First, try the operations described above with your TV's remote
control. If you are able to perform these operations, you may
continue operating this unit with your TV's remote control. If you
are not able to perform these operations, configure HDMI control
settings (☞p. 31).
With some TVs, the following additional functions can be
controlled.
• Turning the UniVolume function on and off
• Navigating this unit's setup menu displayed on the TV
• Operating the browse/playback screens for an iPod or USB
device connected to the USB jack (YSP-4300 only)
1)