Cutting Height Adjustment Levers - Honda HRZ216TDA Harmony II Owner's Manual

Cutting Height Adjustment Levers

The mower deck can be set to any of the six approximate settings.
Each wheel should be adjusted to the same position.
HRR, HRS
Lower deck
Raise deck
HRZ
Lower deck
Raise deck
Move both the front and rear adjusters backward.
Move both the front and rear adjusters forward.
HRR/HRT
3/4" (19 mm)
1-1/4 " (29 mm)
1-3/4" (41.5 mm)
2-1/4" (54 mm)
2-3/4" (67 mm)
3-1/4 (79 mm)
REAR
ADJUSTMENT
LEVER
RIGHT SIDE SHOWN
Move front adjusters forward & rear adjusters backward.
Move front adjusters backward & rear adjusters forward.
3/4" (19 mm)
1-1/4 " (29 mm)
1-3/4" (41.5 mm)
2-1/4" (54 mm)
2-3/4" (67 mm)
3-1/4 (79 mm)
REAR
ADJUSTMENT
LEVER
RIGHT SIDE SHOWN
(front wheel in trailing position)
CONTROLS & FEATURES
HRS
1" (25 mm)
1-1/2 " (37 mm)
2" (50 mm)
2-1/2" (66 mm)
3" (75 mm)
3-1/2 (87 mm)
FRONT
ADJUSTMENT
LEVER
FRONT
ADJUSTMENT
LEVER
11