Configuration Information - Factory Integrated Models - HP ProLiant BL685c Quickspecs

QuickSpecs

Configuration Information - Factory Integrated Models

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are NOTE: NOTE: NOTE:
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO
product offerings and requirements.
NOTE: NOTE: NOTE: HP does not allow factory integration of options into standard models listed above. NOTE:
Configure-to-order servers must start with a CTO Chassis.
NOTE: FIO indicates that this option is available only as a Factory Installable Option. NOTE: NOTE: NOTE:
Step 1: Base Server Blade Configuration Step 1: Base Server Blade Configuration Step 1: Base Server Blade Configuration Step 1: Base Server Blade Configuration
Models Models Models Models
Step 2: Choose Required Options (one of the following from each list unless otherwise Step 2: Choose Required Options (one of the following from each list unless otherwise Step 2: Choose Required Options (one of the following from each list unless otherwise Step 2: Choose Required Options (one of the following from each list unless otherwise
noted): noted): noted): noted):
Processors Processors Processors Processors
Memory Memory Memory Memory
HP ProLiant BL685c G5 CTO Blade
One (1) embedded NC326i Dual Port Gigabit Ethernet Server Adapter, two (2)
embedded NC373i Multifunction Gigabit Ethernet Server Adapters, and one (1)
additional 10/100 network adapter dedicated to iLO 2 Management
Integrated Smart Array E200i RAID controller
NOTE: NOTE: NOTE: NOTE: Controller cache module selection is required. Select either the standard 64
MB module or the optional 128 MB module in step 2 below.
Two small form factor (SFF) SAS/SATA hot plug hard drive bays
Integrated Lights-Out 2 Standard Blade Edition
For dual (2) processor configurations choose (one of the following): For dual (2) processor configurations choose (one of the following): For dual (2) processor configurations choose (one of the following): For dual (2) processor configurations choose (one of the following):
AMD Opteron™ processor Model 8384 (2.7 GHz, 6 MB L3 Cache, 75W ACP)
Processor Option Kit, FIO Base
NOTE: If 4 processors are desired, select one 494267-L21 and one 494267-B21. NOTE: NOTE: NOTE:
AMD Opteron processor Model 8382 (2.6 GHz, 6 MB L3 Cache, 75W ACP)
Processor Option Kit, FIO Base
NOTE: If 4 processors are desired, select one 516050-L21 and one 516050-B21. NOTE: NOTE: NOTE:
AMD Opteron processor Model 8356 (2.3 GHz, 2 MB L3 Cache, 75W ACP)
Processor Option Kit, FIO Base
NOTE: If 4 processors are desired, select one 447977-L21 and one 447977-B21. NOTE: NOTE: NOTE:
AMD Opteron processor Model 8354 (2.2 GHz, 2 MB L3 Cache, 75W ACP)
Processor Option Kit, FIO Base
NOTE: If 4 processors are desired, select one 447978-L21 and one 447978-B21. NOTE: NOTE: NOTE:
Low Power AMD Opteron processor Model 8376 HE (2.5 GHz, 6 MB L3 Cache,
55W ACP) Processor Option Kit, FIO Base
NOTE: If 4 processors are desired, select one 516052-L21 and one 516052-B21. NOTE: NOTE: NOTE:
Low Power AMD Opteron processor Model 8347 HE (1.9 GHz, 2 MB L3 Cache,
55W ACP) Processor Option Kit
NOTE: NOTE: NOTE: NOTE: If 4 processors are desired, select one 456908-L21 and one 456908-B21.
NOTE: All HP ProLiant BL685c G5 processor option kits contain two processors. NOTE: NOTE: NOTE:
NOTE: The HP ProLiant BL685c G5 only supports 2 and 4 processor configurations. NOTE: NOTE: NOTE:
1 GB REG PC2-5300 DDR2 2 x 512 MB Single Rank Kit
NOTE: Compatible with the AMD Opteron processor Models 8347 HE, 8354, and NOTE: NOTE: NOTE:
8356.
DA - 13022 North America — Version 14 — November 12, 2009
HP ProLiant BL685c Generation 5 (G5) Server Blade HP ProLiant BL685c Generation 5 (G5) Server Blade HP ProLiant BL685c Generation 5 (G5) Server Blade HP ProLiant BL685c Generation 5 (G5) Server Blade
454624-B21
494267-L21
516050-L21
447977-L21
447978-L21
516052-L21
456908-L21
408850-B21
Page 11