Vehicle Installation
Installing the Vent Mount:
1
Locate a vent with horizontal
louvers sturdy enough to hold your
PowerConnect Vehicle Dock and radio .
2
If the vent louvers in your vehicle
are recessed, you may need to use
the longer vent clamps with the Vent
Mount . If so, Remove the shorter vent
clamps and install the longer ones into
the Vent Mount . Be sure to observe the
orientation of the vent clamps as shown .
20
Remove End Cap
Slide Extended Vent Clamps In
Extended Vent Clamps
Short Vent
Clamps
Slide Short Vent Clamps Out
Replace End Cap
Meijer.com