Table of Contents
Advertisement
Using Your Snap
FM Presets
FM presets make it easy to store FM channels and then quickly access
them to choose a new FM channel .
Use FM presets when you use PowerConnect or the FMDA to listen
to your Snap through your vehicle's FM radio . (Refer to "Option 3:
PowerConnect Installation Instructions" on page 25 for more information .)
To store an FM preset:
1
Press FM on the top of Snap . The FM icon is displayed on the screen to indicate Radio is in
FM mode, and the display will show the current FM channel .
2 Turn the Rotary knob to tune to the desired FM channel .
3 Press and hold a number button between 1-5 until the corresponding number icon is
displayed on the screen . The FM channel is now set as an FM preset at that button location .
4 To exit, press FM or wait 10 seconds until Snap exits to the main display screen .
To access an FM preset:
1
Press FM on the top of Snap . The FM icon is displayed to indicate the Radio is in FM mode,
and the current FM channel is displayed on the screen .
2 Press the number button between 1-5 that contains the desired FM preset . Snap will tune
to the FM preset and the corresponding number icon will be displayed on the screen .
3 To exit, press FM or wait 10 seconds until Snap exits to the main display screen .
36
Meijer.com
FM
FM
90.1
FM1
1
Advertisement
Table of Contents
