Honda HRC216 Owner's Manual page 28

6. OPERATION
3. Operate the starter.
NOTE:
l
Always release the ROTO-STOP lever before starting the engine. If the blade
drive is engaged, extra effort will be required to operate the starter.
l
Always release the drive clutch lever before starting the engine If the drive
clutch is held forward while starting, the mower will move forward before
you are ready to guide it.
Place your foot on the step of the cutter deck. Pull the starter grip lightly until
you feel resistance, then pull briskly.
When the engine starts, return the starter rope gently.
1 IMPORTANT NOTICE
If you let the starter grip snap back against the
engine, it may damage the starter.
26