HP Compaq tc1100 Maintenance And Service Manual page 175

Removal and Replacement Procedures
7. Position the docking station with the left side toward you.
✎
Make sure the docking stand and pivot arm are supported
before removing the following screws. The docking stand and
pivot arm can fall if not supported.
8. Remove the following screws:
❏
❏
❏
9. Remove the docking stand and pivot arm
Removing the Docking Stand and Pivot Arm
5–40
2 PM2.5 × 8.0 screws
the bottom case.
1 PM2.5 × 11.0 screw
to the bottom case.
3 PM2.5 × 8.0 screws
the bottom case.
that secure the cable bracket to
1
2 that secures the pivot arm hinge
3 that secure the pivot arm hinge to
Maintenance and Service Guide
4 .