Removal and Replacement Procedures
Battery pack, Li-Ion
8. Remove the battery pack by following these steps:
a. Turn the tablet PC upside down, with the power/standby
b. Remove the optional PM2.0 × 4.0 retention screw
c. Slide the battery release latch
d. Place your finger in the notch, lift the left side of
e. Remove the battery pack.
Removing the Battery Pack
Reverse the preceding procedures to install the battery pack.
5–8
Battery Pack
Spare Part Number Information
switch and jog dial toward you.
secures the battery pack to the tablet PC.
tablet PC and hold it to release the battery pack.
the battery pack, and swing it to the right
2
toward the back of the
3
Maintenance and Service Guide
348333-001
1
that
.