Symmetricom 59552A User Manual page 18

Chapter 1 Getting Started
Preparing the 59552A/59553A for Use
1 Cover screw
2 Top cover
3 Cable sleeve
Figure 1-1B. 129 Vdc DC Power Cable Assembly
13 As shown in Figure 1-1B, join the two covers (2, 6) by properly
positioning them together and tightening the wire clamp screws (4).
14 Finally, secure the two covers by tightening the cover screw (1).
15 Observing the correct polarity, attach the other ends of the wires to a
proper dc power source to operate the Module.
1-10
4 Wire clamp screws
5 Wire clamp
6 Bottom cover
User's Guide