Gigabyte GA-Z77X-UP5 TH rev. 1.0 User Manual page 104

capacity than the old one.)
Step 1:
Intel(R) Rapid Storage Technology - Option ROM - 11.0.0.1339
Copyright(C) 2003-11 Intel Corporation. All Rights Reserved.
1. Create RAID Volume
2. Delete RAID Volume
"Degraded volume and disk available for rebuilding detected. Selecting
a disk initiates a rebuild. Rebuild completes in the operating system.
Select the port of the destination disk for rebuilding (ESC to exit):
RAID Volumes :
ID Drive Model
1 WDC WD800JD-22LS
Physical Disks :
[ ]-Previous/Next
ID Drive Model
0 ST3120026AS
1 WDC WD800JD-22LS
[ ]-Select
Step 2:
icon
Intel(R) Rapid Storage Technology - Option ROM - 11.0.0.1339
Copyright(C) 2003-11 Intel Corporation. All Rights Reserved.
1. Create RAID Volume
2. Delete RAID Volume
3. Reset Disks to Non-RAID
RAID Volumes :
ID Name Level
0 Volume0 RAID1(Mirror)
Physical Devices :
ID Devices Model
0 ST3120026AS
1 WDC WD800JD-22LS
Volumes with "Rebuild" status will be rebuilt within the operating system.
[ ]-Select
[
Serial #
WD-WMAM9W736333
[ENTER]-Select
Serial # Size
3JT354CP 111.7GB
WD-WMAM9W736333 111.7GB
[ESC]-Exit
Strip Size
N/A 111.7GB
Serial # Size
3JT354CP 111.7GB
WD-WMAM9W736333 111.7GB
[ESC]-Exit
- 103 -
]
3. Reset Disks to Non-RAID
4. Exit
Size
111.7GB
[ESC]-Exit
Type/Status(Vol ID)
Member Disk (0)
Non-RAID Disk
[ENTER]-Select Menu
4. Recovery Volume Options
5. Acceleration Options
6. Exit
Status Bootable
Rebuild Yes
Type/Status(Vol ID)
Member Disk (0)
Member Disk (0)
[ENTER]-Select Menu
Appendix