Specifications; Setup - Chicago Electric 68012 Owner's Manual

Specifications

Setup ‑ Before Use:
Read the ENTIRE IMpORTANT SAFETy INFORMATION section at the beginning of this
manual including all text under subheadings therein before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages,
refer to Parts List and Diagram on page 11.
Functions
charger Indicator LED's
1. The green LED lights once Charger is plugged in.
2. The red LED will light during charging.
3. When Battery Pack is fully charged,
both red and green LED's will stay lit.
4. If both red and green LED's flash, the charger and/or
battery are not functioning properly. Stop charging
immediately and contact a qualified technician.
Item 68012
Charger Input Rating
Battery Rating
Battery Type
No Load Speed
Accessories
power Switch Speed control Knob
Sanding pad
Note: Sanding Pad sold separately.
Figure A
For technical questions, please call 1‑800‑444‑3353.
120V~ / 60Hz
12V / 1300mAh
Li-ion
10,000-18,000 OPM
Hex Key
Battery pack
Figure B
Green LED
Red LED
Page 7