Honda 2000 Civic Coupe Owner's Manual page 182

Main Menu
Table of Contents
10.Install the radiator cap, and
tighten it to the first stop.
11.Start the engine and let it run until
the radiator fan comes on two
times. Then stop the engine.
12.Remove the radiator cap. Fill the
radiator with coolant up to the
filler neck and the reserve tank up
to the MAX mark.
13.Start the engine and hold it at
1,500 rpm until the cooling fan
comes on. Turn off the engine.
Check the coolant level in the
radiator and add coolant if needed.
14.Instal l the radiator cap, and
tighten it fully.
15.If necessary, fill the reserve tank
to the MAX mark. Install the
reserve tank cap.
Cooling System
Maintenance