Honda 2009 Accord Coupe Owner's Manual page 334

Lights
Replacing a Fog Light Bulb
If equipped
Your vehicle uses halogen light
bulbs. When replacing a bulb, handle
it by its plastic case, and protect the
glass from contact with your skin or
hard objects. If you touch the glass,
clean it with denatured alcohol and a
clean cloth.
Halogen light bulbs get very hot when
lit. Oil, perspiration, or a scratch on
the glass can cause the bulb to overheat
and shatter.
The fog lights were properly aimed
when your vehicle was new. If you
regularly carry heavy items in the
trunk or pull a trailer, readjustment
may be required. Adjustment should
be done by your dealer or other
qualified technician.
328
FASTENERS
1. Passenger's side
Remove the three fasteners with a
flat-tip screwdriver.
Pull down the under cover from
the bumper carefully.
ELECTRICAL
TAB
CONNECTOR
2. Remove the electrical connector
from the bulb by pushing on the
tab to unlock it, then slide the
connector off the bulb.
3. Remove the bulb by turning it
about one-quarter turn
counterclockwise.