Advertisement
QuickSpecs
Configuration
HP RPS1600 1600W AC Power Supply
Installs into JG136A only
Configuration Rules:
Note 1
Note 2
Note 3
Note 4
Options for the HP 1600 External RPS Power Supply
HP X290 1000 A JD5 2m RPS Cable
Remark:
Configuration Rules:
Note 1
Transceivers
SFP Transceivers
HP X121 1G SFP LC SX Transceiver
HP X121 1G SFP LC LX Transceiver
HP X121 1G SFP RJ45 T Transceiver
HP X120 1G SFP LC SX Transceiver
HP X120 1G SFP LC LX Transceiver
HP X120 1G SFP RJ45 T Transceiver
HP X120 1G SFP LC BX 10-U Transceiver
HP X120 1G SFP LC BX 10-D Transceiver
HP X125 1G SFP LC LH40 1310nm Transceiver
HP X120 1G SFP LC LH40 1550nm Transceiver
HP X125 1G SFP LC LH70 Transceiver
Cables
If this power supply is selected, The JG136A - HP A-RPS1600 Redundant Power System
must be on order or onsite.
Localization required.
Each switch will only support 1 JG136A and 1 JG137A Power supply systems.
This power supply only supported on switch JE007A.
These cables are used to connect the External Power System to Switch.
This Cable is only supported on switch JE007A when used with the RPS 1600 (JG136A)
DA - 13677 EMEA — Version 13 — February 25, 2014
HP 1910 Switch Series
JG137A
See Configuration
Note:1,3
JD187A
See Configuration
Note:1
J4858C
J4859C
J8177C
JD118B
JD119B
JD089B
JD098B
JD099B
JD061A
JD062A
JD063B
Page 10
Advertisement
