D-Link AirPlusXtremeG DI-624 Manual page 76

Troubleshooting
8. Resetting the DI-624 to Factory Default Settings
After you have tried other methods for troubleshooting your network, you
may choose to Reset the DI-624 to the factory default settings.
Remember that D-Link AirPro products network together, out of the box,
at the factory default settings.
To hard-reset the D-Link AirPro DI-624 to Factory Default Settings, please do
the following:
Locate the Reset button on the back of the DI-624
Use a paper clip to press the Reset button
Hold for about 10 seconds and then release
After the DI-624 reboots (this may take a few
minutes) it will be reset to the factory Default
settings
Reset
76