D-Link AirPlusXtremeG DI-624 Manual page 18

Using the Configuration Menu
Please be sure to
remove any existing
PPPoE client software
installed on your
computers.
Choose PPPoE (Point to
Point Protocol
Ethernet) if your ISP uses
a PPPoE connection. Your
ISP will provide you with a
username and password.
This option is typically
used for DSL services. Se-
lect Dynamic PPPoE to ob-
tain an IP address auto-
matically for your PPPoE
connection. Select Static
PPPoE to use a static IP
address for your PPPoeE
connection.
PPPoE-
User Name-
Retype Password-
Service Name-
IP Address-
Primary DNS
Address-
Secondary
DNS Address-
Maximum Idle
Time-
Home > WAN > PPPoE
over
Choose this option if your ISP uses PPPoE. (Most DSL users
will select this option.)
Dynamic PPPoE-
your ISP.
Static PPPoE-you have an assigned (static) IP Address.
Your PPPoE username provided by your ISP.
Re-enter the PPPoE password
Enter the Service Name provided by your ISP (optional).
This option is only available for Static PPPoE. Enter the static IP
Address for the PPPoE connection.
Primary DNS IP address provided by our ISP
This option is only available for Static PPPoE. Enter the static IP
Address for the PPPoE connection.
The amount of time of inactivity before disconnecting your PPPoE
session. Enter a Maximum Idle Time (in minutes) to define a
maximum period of time for which the Internet connection is main-
tained during inactivity. If the connection is inactive for longer
than the defined Maximum Idle Time, then the connection will be
dropped. Either set this to zero or enable Auto-reconnect to dis-
able this feature.
receive an IP Address automatically from
(Continued on the next page)
18