Connecting The Power Cables; Securing The Power Cable(S) - Dell PowerVault MD3260 Getting Started Manual

Dell powervault md3260/3260i/3660i/3660f/3060e storage arrays
Hide thumbs Also See for PowerVault MD3260:
Table of Contents

Advertisement

Connecting The Power Cable(s)
Figure 4. Connecting the Power Cable(s)
Connect the system's power cable(s) to the system.

Securing The Power Cable(s)

Figure 5. Securing the Power Cable(s)
Open the cable retention bracket by pulling the tabs on its sides, insert the cable, and secure the system power cable,
as shown in the illustration.
Plug the other end of the power cable(s) into a grounded electrical outlet or a separate power source such as an
uninterruptible power supply (UPS) or a power distribution unit (PDU).
5

Advertisement

Table of Contents
loading

Table of Contents