Table of Contents
Advertisement
MXD-D400
IOP DATA RECORDING AND DISPLAY WHEN OPTICAL PICK-UP AND NON-VOLATILE MEMORY (IC195 OF
BD (MD) BOARD) ARE REPLACED
The IOP value labeled on the optical pick-up can be recorded in the non-volatile memory. By recording the value, it will eliminate the need
to look at the value on the optical pick-up label. When replacing the optical pick-up or non-volatile memory (IC195 of BD (MD) board),
record the IOP value on the optical pick-up according to the following procedure.
Record Procedure:
1. Press the
/
button to turn on the power.
?
1
[
AMS
2. Press the
l
L
version".
[
AMS
]
3. Turn the
l
L
[
AMS
4. Turn the
l
L
[
AMS
5. Turn the
l
L
6. The display becomes "Ref=@@@.@" (@ is an arbitrary number) and the numbers which can be changed will blink.
7. Input the IOP value written on the optical pick-up label.
To select the number : Turn the
To select the digit
: Press the
[YES]
8. When the
button is pressed, the display becomes "Measu=@@@.@" (@ is an arbitrary number).
9. As the adjustment results are recorded for the 4 value. Leave it as it is and press the
10. "Complete!" will be displayed momentarily. The value will be recorded in the non-volatile memory and the display will become "Iop
Write (C05)".
[MENU/NO]
11. Press the
button to display "MD Test".
12. Press the
/
button to turn the power off.
?
1
Display Procedure:
1. Press the
/
button to turn on the power.
?
1
[
AMS
2. Press the
l
L
version".
[
AMS
]
3. Turn the
l
L
[
AMS
4. Turn the
l
L
[
AMS
5. Turn the
l
L
6. "@@.@/##.#" is displayed and the recorded contents are displayed.
@@.@ : indicates the IOP value on the optical pick-up label.
##.#
: indicates the IOP value after adjustment
[MENU/NO]
7. To end, press the
[MENU/NO]
8. Press the
button to display "MD Test".
9. Press the
?
/
button to turn the power off.
1
12
]
[INPUT]
(CD) knob and
button at the same time, press the
(CD) knob and when "MD Test" is displayed, press the
]
(MD) knob to display "[Service]", and press the
]
(MD) knob to display "Iop Write" (C05), and press the
[
AMS
]
l
L
(MD) knob.
[
AMS
]
l
L
(MD) knob.
]
[INPUT]
(CD) knob and
button at the same time, press the
(CD) knob and when "MD Test" is displayed, press the
]
(MD) knob to display "[Service]", and press the
]
(MD) knob to display "Iop Read" (C26), and press the
button to display "Iop Read" (C26).
[
AMS
]
l
L
(MD) knob to display "SYS
[
AMS
]
l
L
(MD) knob.
[YES]
button.
[YES]
button.
[YES]
button.
[
AMS
]
(MD) knob to display "SYS
l
L
[
AMS
]
l
L
(MD) knob.
[YES]
button.
[YES]
button.
Hide quick links:
Advertisement
Table of Contents
