D-Link DHP-306AV User Manual page 9

Section 2 - Installation
4. Second Adapter
After above network security setup steps, your Powerline network will be securely configured with the same network
encryption key. The adapters will memorize the security settings even if they are unplugged.
Note: To change the private encryption key, please reset the adapter back to its default value by pressing the Reset
button for 1 second and then follow the security setup procedure above.
5. Adding More Adapters
If you would like to add more than two adapters, press the button of the additional adapter for no more than two seconds.
The Power LED will start blinking after you release the button.
Then press the button of any adapter in your existing Powerline network for no more than two seconds. The Power
LED will start blinking after you release the button.
Note: Both Security buttons must be pressed within two minutes.
After above network security setup steps, your Powerline network will be securely configured with the same network
encryption key.
D-Link DHP-306AV User Manual 9