Honda Outboard Motor BF20 Owner's Manual page 11

4. Motor Angle
Adjust the motor so the axis of the
propeller is parallel with the water
surface.
CAUSES BOAT TO "SQUAT"
" ' INCORRECT
CAUSES BOAT TO "PLOW"
5. Motor Angle Adjustment
If the propeller axis is not parallel
with the water, adjust the angle of
the motor by relocating the ad-
justing bolt on the stern brackets.
There are four adjustment
positions.
1. Loosen the wing nut to free the
adjusting bolt.
2.Adjust the angle of the motor,
and tighten the wing nut. Be
sure that the bolt head and wing
nut are seated in one of the four
recesses on the adjustment slot.
CORRECT
GIVES MAXIMUM PERFORMANCE
ADJUSTING ROD
AND WING NUT
9