Fast Idle Lever; Programmed Fuel Injection (Pgm-Fl) Indicator Light/Buzzer - Honda Outboard Motor BF115A Owner's Manual

. 3. CONTROLS (SIDE-MOUNT TYPE)
Fast Idle Lever
N
(neutral)
A
AXIMUM FAST IDLE
LOWEST POSITION
LEI
The fast idle lever is only needed for
starting carbureted outboard models.
The BF115A and BFl30A models use
programmed fuel injection so, this
lever will not be needed for starting.
After the engine starts and if the
outside temperature is below 41 OF (YC),
the fast idle lever can be used
to accelerate engine warm up.
.EVER
The fast idle lever will not
move unless the remote control lever
is in the N (neutral) position.
Conversely, the remote control lever
will not move unless the fast idle
lever is in the lowest position.
Raise the fast idle lever, and hold it all
the way up to provide maximum fast
idle.
Lower the fast idle lever to the lowest
position to decrease the fast idle.
Programmed Fuel Injection
(PGM-FI) Indicator Light/Buzzer
PGM-FI
INDICATOR
LIGHT
/
The PGM-FI indicator light turns on and
the buzzer sounds when the engine
control system detects a malfunction,
and when the ignition key is turned from
OFF to ON.
17