Table 31. Removal steps of Micro-Processor card (continued)
3
M2 × 3 mm, height 5.5 mm, stud, nylon-coated (1)
When installing: Make sure that the connector
2030 Inverter card
For access, remove these FRUs in order:
•
"1020 Battery pack" on page 63
•
"2010 LCD front bezel" on page 104
•
"2020 Micro-Processor card" on page 107
Table 32. Removal steps of inverter card
Note: Some models do no have the inverter card.
5
is attached firmly.
Chapter 8
Black
0.181 Nm
(1.85 kgfcm)
.
Removing and replacing a FRU
109