Table 30. Removal steps of LCD front bezel for touch panel LCD model or direct-bonding glass LCD model (continued)
When installing: Make sure that attach the fingerprint reader connector firmly.
2020 Micro-Processor card
For access, remove these FRUs in order:
•
"1020 Battery pack" on page 63
•
"2010 LCD front bezel" on page 104
Table 31. Removal steps of Micro-Processor card
1
Note: Step
is only for models with the inverter card. For models without the inverter card, skip step
1
In step
, detach the connector from the inverter card.
.
Chapter 8
Removing and replacing a FRU
1
.
107