Usb Setup - D-Link DSL-2751 User Manual

Section 3 - Configuration
The DSL router comes with a USB 2.0 interface which you can connect a USB printer, a USB storage device (e.g. USB disk / USB external Hard
Disk) or a USB 3G modem.
To configure the USB Device on the router, click USB Setup in the SETUP tab. Router can be configured as a USB network file server when you
plug-in a USB Storage device. Router can be configured as a USB Printer server when you plug- in a USB Printer device. Router can connect to
Internet via 3G network when you plug-in a USB 3G USB Modem.
To access the USB SETUP setting window, click on the USB SETUP button in the SETUP tab
USB NETWORK PRINTER SERVER
Both SharePort and onboard Print Server allow you to share your USB
printer as network printer server to all the connected local hosts.
(Note: Onboard printer is the 1
require users installs any extra client utility in the computer. SharePort is
another USB printer server which requires users install client utility in the
computer.)
Notice:
• NOT every USB printer can play as a network printer server.
Please check your local vendor for more information.
• For better capability and users' experience, we strongly
recommend you use SharePort as your network printer server
solution.
To activate USB Network Print Server feature, you have to tick Enable
r
SharePort and Print Serve
button,
D-Link DSL-2751 User Manual
st
printer server solution which DOES NOT
in the USB Setup page and press Apply

USB SETUP

51