3.
Install:
a. display assembly
b. display-hinge cover
c. palmrest
d. keyboard
e. keyboard trim
f.
mSATA
g. base cover
h. battery
i.
SD card
4.
Follow the procedures in
Removing the Display Assembly
1.
Follow the procedures in
2.
Remove:
a. battery
b. SD card
c. base cover
d. keyboard
e. palmrest
3.
Perform the following steps as shown in the illustration:
a. Disconnect the WLAN cable from the system board [1].
b. Unroute the WLAN cables from the slot [2].
c. Remove the screw that secures the heatsink to the computer.
28
After Working Inside Your Computer .
Before Working Inside Your Computer .