Download Print this page

Radio Shack Amplified VHF/UHF/FM Indoor Antenna Owner's Manual

Amplified vhf/uhf/fm indoor antenna

Advertisement

Quick Links

15-1828.fm Page 1 Thursday, October 26, 2000 9:51 AM
Amplified VHF/UHF/FM Indoor Antenna
Your RadioShack Amplified VHF/UHF/FM In-
door Antenna boosts signals by 10 dB to pro-
vide
clearer
television
antenna has adjustable telescoping, chrome-
plated VHF/FM elements for better VHF/FM
reception. The multi-position tuning control
provides improved VHF picture quality and
you can adjust the UHF reflector dish for bet-
ter UHF reception. The antenna comes with
a 3-foot, 75-Ohm coaxial cable for use with
cable-ready televisions.
WARNING:
To reduce the risk of fire or
shock hazard, do not expose this product to rain
or moisture.
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN.
CAUTION:
TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER OR BACK. NO USER-SERVICE-
ABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED PERSONNEL.
This symbol is intended to alert
you to the presence of uninsu-
lated dangerous voltage within
the product's enclosure that might
be of sufficient magnitude to con-
stitute a risk of electric shock. Do
not open the product's case.
This symbol is intended to inform
you that important operating and
!
maintenance
included in the literature accom-
panying this product.
OWNER'S MANUAL — Please read before using this equipment.
Cautions:
reception.
The
!
INSTALLATION
instructions
are
©
2000 RadioShack Corporation. All Rights Reserved.
RadioShack and RadioShack.com are trademarks
You must use a Class 2 power
!
source that supplies 9V DC
and delivers at least 100 mA.
Its center tip must be set to positive and
its plug must fit the antenna's
jack. The supplied adapter meets these
specifications. Using an adapter that
does not meet these specifications
could damage the antenna or the
adapter.
• Always connect the AC adapter to the
antenna before you connect it to AC
power. When you finish, disconnect the
adapter from AC power before you dis-
connect it from the antenna.
9V DC
Jack
9V DC
Adapter
TV or
FM Radio
1. Screw the telescoping VHF/FM antenna
elements into their holders.
2. Connect the supplied coaxial cable
between the antenna's
tor and the TV or FM radio's 75-ohm
connector.
used by RadioShack Corporation.
9V DC
75 OHM
Connector
Antenna
Coaxial
Cable
75 OHM
Connector
connec-
75-OHM

Advertisement

loading

Summary of Contents for Radio Shack Amplified VHF/UHF/FM Indoor Antenna

  • Page 1 15-1828.fm Page 1 Thursday, October 26, 2000 9:51 AM Amplified VHF/UHF/FM Indoor Antenna OWNER’S MANUAL — Please read before using this equipment. Your RadioShack Amplified VHF/UHF/FM In- Cautions: door Antenna boosts signals by 10 dB to pro- You must use a Class 2 power...
  • Page 2 15-1828.fm Page 2 Thursday, October 26, 2000 9:51 AM Note: If your TV or FM radio has only 3. Using a Phillips screwdriver, insert the screw VHF terminal connections, connect supplied screws into the holes. Be sure 75-to-300-Ohm transformer/splitter the screw heads extend approximately between the supplied coaxial cable and inch from the wall.
  • Page 3 15-1828.fm Page 3 Thursday, October 26, 2000 9:51 AM...
  • Page 4 15-1828.fm Page 4 Thursday, October 26, 2000 9:51 AM Limited Ninety-Day Warranty This product is warranted by RadioShack against manufacturing defects in material and workman- ship under normal use for ninety (90) days from the date of purchase from RadioShack company- owned stores and authorized RadioShack franchisees and dealers.

This manual is also suitable for:

15-1828