Removing The Display-Hinge Cap; Installing The Display-Hinge Cap; Removing The Display Assembly - Dell Latitude E6540 Owner's Manual

Notebook pc
Hide thumbs Also See for Latitude E6540:
Table of Contents

Advertisement

p) hard drive
q) keyboard
r) battery
s) ExpressCard
t) SD card
4.
Follow the procedures in

Removing the Display-Hinge Cap

1.
Follow the procedures in
2.
Remove the battery.
3.
Remove the screws that secure the display-hinge cap to the computer and remove the display-hinge cap from the
computer.

Installing the Display-Hinge Cap

1.
Align the display-hinge cap with the screw holes.
2.
Tighten the screws to secure the display-hinge cap to the computer.
3.
Install the battery.
4.
Follow the procedures in

Removing the Display Assembly

1.
Follow the procedures in
2.
Remove:
a) battery
b) display-hinge cap
c) base cover
d) base corner caps
3.
Disconnect the antenna cables connected to the WLAN card and release it from the routing channel. Disconnect
the camera cable from the system board.
After Working Inside Your Computer .
Before Working Inside Your Computer .
After Working Inside Your Computer .
Before Working Inside Your Computer .
43

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents