Setting - Sanyo PLC-XE45 Owner's Manual

Setting

Setting
This projector has Setting menu that allows you to set up
the other various functions described as follows:
1
Press the MENU button to display the On-Screen
Menu. Use the Point
frame pointer to the Setting Menu icon.
2
Use the Point
ed
pointer to the item that you want to set and then press
the SELECT button. The Setting dialog box appears.
Language
The language used in the On-Screen Menu is available
in English, German, French, Italian, Spanish, Portuguese,
Dutch, Swedish, Finnish, Polish, Hungarian, Romanian,
Russian, Chinese, Korean, or Japanese.
Keystone
This function corrects distortion of a projected image.
Select either Store or Reset with the Point
then press the SELECT button. The keystone dialog box
appears. Correct keystone with the Point
Store...... Store the keystone correction even when the
AC power cord is unplugged.
Reset...... Reset the keystone correction when the AC
power cord is unplugged.
Blue back
Press the Point
7 8
function is "On, " a blue image is displayed while the input
signal is not detected.
Display
Press the Point
7 8
decides to display the On-Screen Displays.
On ..................... Display all the On-Screen Displays.
Countdown off... Display the input image instead of
Off..................... Do not show the On-Screen Displays.
On-Screen Menu
●
"Power off?"
●
P-Timer
●
"No signal" for Power management item (p.45)
●
"Please wait... "
●
Arrows for panning mode (pp.32–33)
●
buttons to move the red
7 8
buttons to move the red frame
7 8
buttons (p.22).
ed
buttons to switch on/off. When this
buttons to switch on/off. This function
Use this function when you want
to project images after the lamp
becomes bright enough. This mode is
set as a default.
the countdown when turning on the
projector. Use this function when you
want to project the image as early as
possible even when the lamp is not
bright enough.
except:
Setting Menu (Language)
buttons, and
Setting Menu
Set the red framed
icon
pointer to the item
and press the
SELECT button.
Press the SELECT button
at Language item, the
SELECT
Language Menu appears.
button
Press the SELECT
button at this item
to display the other
languages.
Press the SELECT
button at this item to
close the dialog box.
41