Image Level Selection - Sanyo PLC-XE45 Owner's Manual

Computer Input

Image Level Selection

Direct Operation
Select an image level from among Dynamic, Standard, Real,
Blackboard (Green), Image 1, Image 2, Image 3, and Image
4 with the IMAGE button on the remote control.
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture level preset on the projector.
Real
Picture level with improved halftone for graphics.
Blackboard (Green)
For viewing the image projected on a blackboard. This mode
assists to enhance the image projected on a blackboard.
This is mainly effective on a green colored board, not truly
effective on a black colored board.
Image 1–4
User preset image in the Image Adjust Menu (p.32).
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point
frame pointer to the Image Select Menu icon.
2
Use the Point
pointer to the desired level and then press the SELECT
button.
Dynamic
For viewing pictures in a bright room.
Standard
Normal picture level preset on this projector.
Real
Picture level with improved halftone for graphics.
Blackboard(Green)
For viewing the image projected on a blackboard. See above
for further description.
Image 1–4
User preset image in the Image Adjust Menu (p.32).
30
buttons to move the red
7 8
buttons to move the red frame
ed
Remote Control
IMAGE
button
Image Select Menu icon
Image Select Menu
Move the red frame pointer to
the desired level and press the
SELECT button.
The image level being selected.
IMAGE button
Dynamic
Standard
Real
Blackboard(Green)
Image 1
Image 2
Image 3
Image 4