Table of Contents
Advertisement
Advanced Mode
Each function on the configuration list will be explained in the following sections. Those functions that are
displayed only in Advanced Mode are marked with Advanced Mode . If you want to set up advanced
functions, please click
[Advanced Mode]
Navigation Area provides an instant switch among Home page (the monitoring page for live viewing),
Client settings, Configuration page, and multi-language selection.
System > General settings
This section explains how to configure the basic settings for the Network Camera, such as the
host name and system time. It is composed of the following two columns: System, and System
Time. When finished with the settings on this page, click Save at the bottom of the page to
enable the settings.
System
Host name: Enter a desired name for the Network Camera. The text will be displayed at the top of the
main page, and also on the view cells of the ST7501 and VAST management software.
Turn off the LED indicators: If you do not want others to notice the network camera is in operation, you
can select this option to turn off the LED indicators.
Configuration List
Click to switch to Basic Mode
Firmware Version
on the bottom of the configuration list to quickly switch over.
Navigation Area
User's Manual - 33
VIVOTEK
Advertisement
Table of Contents
