4.
Install:
a. palmrest assembly
b. base corner caps
c. base cover
d. display-hinge cover
e. optical drive
f.
hard drive
g. keyboard
h. keyboard trim
i.
battery
j.
ExpressCard
k. SD Card
5.
Follow the procedures in
Removing the WiFi-Switch Board
1.
Follow the procedures in
2.
Remove:
a. SD Card
b. ExpressCard
c. battery
d. keyboard trim
e. keyboard
f.
hard drive
g. optical drive
h. display-hinge cover
i.
base cover
j.
base corner caps
k. palmrest assembly
3.
Perform the following steps as shown in the illustration:
a. Disconnect the WiFi-switch board cable from the system board.
b. Remove the screws that secure the WiFi-switch board and lift it from the computer.
After Working Inside Your Computer .
Before Working Inside Your Computer .
33