Troubleshooting; Diagnostic Leds - Dell OptiPlex 390 Owner's Manual

Troubleshooting

Diagnostic LEDs

NOTE: The diagnostic LEDs only serve as an indicator of the progress through the
Power-on Self-Test (POST) process. These LEDs do not indicate the problem that
caused the POST routine to stop.
The diagnostic LEDs are located on the front of the chassis next to the power
button. These diagnostic LEDs are only active and visible during the POST
process. Once the operating system starts to load, they turn off and are no
longer visible.
The system now includes pre-POST and POST LEDs in an attempt to help
identifying a possible problem with the system easier and more accurate.
NOTE: The diagnostic lights will blink when the power button is amber or off, and
will not blink when it is blue. This has no other significance.
Diagnostic Light Patterns
LED
Power Button
Problem
Description
Troubleshooting
Steps
The computer is either turned off or is not receiving
power.
• Re-seat the power cable in the power connector at
the back of the computer and the electrical outlet.
• Bypass power strips, power extension cables, and
other power protection devices to verify that the
computer turns on properly.
• Ensure that any power strips being used are plugged
into an electrical outlet and are turned on.
• Ensure that the electrical outlet is working by testing
it with another device, such as a lamp.
20
67