Preparing Your Management Station - Dell NX3600 Deployment Manual

Fluidfs nas solutions
Hide thumbs Also See for NX3600:
Table of Contents

Advertisement

Figure 7. All-in-One Non-Redundant Option
NOTE: For more information on the details of cabling the NAS controller(s) and the MD system(s), see
Overview.

Preparing Your Management Station

A management station is required to manage and configure the NAS cluster solution. The NAS cluster solution can be
accessed using either the CLI or the Dell PowerVault NAS Manager.
NOTE: You can either log on to the CLI or the NAS Manager. It is highly recommended that you do not attempt to
log on to both the CLI and NAS Manager at the same time.
The minimum requirements for the management station are:
IPv6 must be enabled.
The NAS Initial Deployment Utility (IDU) must be installed.
NOTE: You can download and install the latest version of the Dell NAS IDU from dell.com/support.
The NAS cluster solution must be cabled appropriately and for the initial deployment, both the management
station and NAS Appliance(s) must be connected to the same physical client or LAN switch.
Either Microsoft Internet Explorer or Mozilla Firefox must be installed with JavaScript enabled.
Modular Disk Storage Manager (MDSM) must be installed to manage the MD storage array.
14
Cabling

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nx3610

Table of Contents