All-In-One Non-Redundant Option - Dell NX3600 Deployment Manual

Figure 6. All-in-One High-Availability Option
NOTE: For more information on the details of cabling the NAS controller(s) and the MD system(s), see
Overview.

All-In-One Non-Redundant Option

In the all-in-one non-redundant option, both the SAN/Internal and client cables are connected to the same switch.
CAUTION: In this configuration, the switch is a single point of failure.
NOTE: It is recommended that you separate the SAN and client subnets using virtual LANs.
Cabling
13