JVC TK-C9510E Instruction page 4

Safety Precautions
R
The unit is to be powered by an AC 24 V or a DC 12 V
power supply. (TK-C9510E only)
R
The AC 24 V and 12 V DC power supply shall conform to
the following: Isolated power supply only. (TK-C9510E only)
R This installation should be made by a qualified service person
and should conform to all local codes.
R This installation shall be in accordance with the National Electrical
Code, ANSI/NFPA 70.
R Any Mention in this manual of Alarm inputs have not been
evaluated by UL to be used for Burglar Alarm Functionality.
R Special technique is required when installing this product.
Please refer to your dealer for installation.
R Rating label is pasted on the camera unit.
R JVC is not liable for any compensation if you drop the camera
due to insecure mounting by not following the installation
description. Pay careful attention during installation.
R When mounting this product to a ceiling or wall, select a location
strong enough to support the weight, be sure to reinforce the
ceiling or wall before installation.
R The camera may drop if the mounting screws are not tightened
securely. Check that the screws are tightened appropriately and
securely.
R Do not install the camera near lighting fixtures of high
temperature, such as spot lights. It might result in failure or fires.
.
Thank you for purchasing this product.
Please refer to "INSTRUCTIONS" (pdf) of supplied CD-ROM for details.
E-4