Handlebar - Life Fitness 9000 Service Manual

Life Fitness 9000HR Treadmill
How To...REMOVE AND REPLACE THE HANDLEBAR
Tools Required: Phillips screwdriver, hex key wrench set, socket and ratchet set
Step 1
Turn the power OFF at the ON/OFF switch and by unplugging the machine at the electrical outlet.
Step 2
Remove the DISPLAY CONSOLE (See "How To...").
Step 3
Loosen, but do not remove, the BOLTS securing the base of the RIGHT HANDRAIL to the Treadmill FRAME.
Step 4
Remove the two SCREWS securing the HANDLEBAR to the two HANDRAILS. Lift out and remove the

HANDLEBAR.

Step 5
Grasp the new HANDLEBAR, align the holes in the HANDLEBAR with those in the LEFT HANDRAIL and re-install
the SCREWS. Repeat on the right side.
Step 6
Reverse Steps 1 through 4 to return the Treadmill to operation.
Cap Screw (existing)
Spacer
8
Keyhole Slot
Lockwasher (#8)
Handlebar Screw
Assembly (#6)
Keyhole Slot
Hex Key
Wrench