LG WF-T851 Service Manual page 42

Lid-B
Detergent
Box
Detergent
box
Detergent
box
10-5. Disassembly of Inlet Valve ASM and
Back Panel
¦_ ¦_ WF-T851, T902
1. Open lid assembly and disassemble detergent box.
2. Disassemble back panel(joined control panel)from
3. Remove two inlet valve screws and pull up inlet
Fig.12
¡Ø Be careful that the silicon rubber of D.T housing for
4. Inlet valve assembly is disassembled by pulling out
Inlet valve ASM
5. To disassemble D.T housing assembly, loosen the
Fig.13
Back Panel
¦_ ¦_ WF-T853, T852, T802, T652, T652A, T452
1. Open lid assembly and disassemble detergent box.
2. Disassemble back panel.
3. Remove two inlet valve screws and pull up inlet
¡Ø Be careful that the silicon rubber of D.T housing for
Fig.12
4. Inlet valve assembly is disassembled by pulling out
Inlet valve ass'y
5. To disassemble D.T housing assembly, loosen the
Fig.13
6. To disassemble shower rinse assembly, loosen the
¡Ø Be careful that the silicon rubber attached on
Fig.14
D.T Housing ASM
top cover.
valve from D.T housing as in Fig. 13.
sealing is not missing.
the lead wire attached on inlet valve assembly,
as in Fig.13.
three screws tightened with the top cover as in
Fig.13, and then pull the assembly back slopped
down.
WF-T452A, 402
valve from D.T housing as in Fig.13
sealing is not missing.
the lead wire attached on inlet valve assembly, as in
Fig.13
two screws tightened with the top cover as in
Fig.13, and then pull the assembly back slopped
down.
fixing screw attached with D.T housing and pull it up
and back.
D.T housing for sealing is not missing.
49