LG WF-T851 Service Manual page 37

WF-T402
• To use the CHECK PROGRAM (QC TEST MODE), press WATER LEVEL key, at the same time and
then the POWER switch on without depositing any laundry.
NO CHECK METHOD
1 Initial state
2 Press once
3 Press twice
4 Press 3 times
5 Press 4 times
6 Press 5 times
7 Press 6 times
8 Press 7 times
• WATER LEVEL FREQUENCY & LAUNDRY AMOUNT ARE DISPLAY BY THE LED (WATER LEVEL,
PROCESS, PROGRAM)
Ex) Water level check ; Frequency : 26.7 KHz
8 EX-LARGE
4 LARGE
2 MEDIUM
1 SMALL
Ex) Laundry amount ; Water level : MEDIUM
8
EX-LARGE
4 LARGE
2
MEDIUM
1
SMALL
LED INDICATOR
• All LED on.
• After 2~3 seconds water level
frequency is displayed on LED.
• After laundry amount detecting,
LED indicates laundry amount
and WATER LEVEL.
• Pump model: MEDIUM water
level Led ON.
• Non-pump model:water level
MEDIUM water level Led OFF.
8
SOAK
4 WASH
2
RINSE
1 SPIN
Pulse : 25
8
SOAK
4
WASH
2
RINSE
1
SPIN
• Laundry amount test.
• After checking laundry amount, motor
is on. (Left & Right)
• Cold water
• Hot water.
• Drain motor is 1st state is play.
• If lid is opened door error display.
(wash and spin LED blinks)
• Drain motor is 2nd state.(Only WF-T Series
• Drain pump is on.
• AUTO off switch.
8 FUZZY
4 ECONOMY
2 JEAN
1 WOOL
8 FUZZY
4 ECONOMY
2 JEAN
1 WOOL
44
CHECK ITEM