Warning Label; About Maintenance; Screen Examples In This Manual; Symbols Used In This Manual - Fujitsu fi-5120C Getting Started Manual

Image scanner
Hide thumbs Also See for fi-5120C:
Table of Contents

Advertisement

Where there is no distinction between the different
versions of the above operating system, the
general term "Windows" is used.
Adobe Acrobat
All the descriptions in this manual assume the
usage of Adobe Acrobat bundled with this
product. However, Adobe Acrobat may be
upgraded without notice. If the descriptions differ
from the screens actually displayed, refer to the
Acrobat's "Help".
Manufacturer
PFU LIMITED
International Sales Dept., Imaging Business
Division, Products Group
Solid Square East Tower, 580 Horikawa-cho,
Saiwai-ku, Kawasaki-shi Kanagawa 212-8563,
Japan
Phone : (81-44) 540-4538
All Rights Reserved, Copyright© PFU LIMITED
2006-2009

About Maintenance

The user must not perform repairs on this scanner.
Contact the store where you purchased the scanner
or an authorized FUJITSU Image Scanner service
provider to have repairs done on this product.
Warning Indications Used In This
Manual
This indication alerts operators
ARNI N G
to an operation that, if not strictly
observed, may result in severe
injury or death.
This indication alerts operators to
AUTION
an operation that, if not strictly
observed, may result in safety
hazards to personnel or damage
to equipment.

Symbols Used In This Manual

This symbol alerts operators to particularly
ATTENTION
important information. Be sure to read this
information.
iv
®
®
Adobe
Acrobat
This symbol alerts operators to helpful
advice regarding operation.
HINT
A TRIANGLE symbol indicates that special
care and attention is required.
The drawing inside the triangle shows the
specific caution.
A CIRCLE with a diagonal line inside
shows action which users may not perform.
The drawing inside or under the circle
shows the specific action that is not
allowed.
Outline characters on a colored
background show instructions users should
R
follow.
It may also include the drawing that shows
the specific instruction.

Warning Label

The glass surface inside the ADF becomes
hot during the operation. Be careful not to
touch the glass surface inside the ADF.
Do NOT remove from the scanner, stain or
ATTENTION
scratch the warning labels.

Screen Examples In This Manual

The screen examples in this manual are subject to
change without notice in the interest of product
improvement. If the actual displayed screen
differs from the screen examples in this manual,
operate by following the actual displayed screen
while referring to the User's Manual of the scanner
application you are using.
The screenshots in this manual were captured
from FUJITSU TWAIN32 scanner driver,
ScandAll PRO Image Capturing Utility Software,
FUJITSU ISIS scanner driver, QuickScan™
image capturing software and Adobe
®
®
Acrobat
.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fi-5220c

Table of Contents