Table of Contents
Advertisement
The menu allows you to make the various settings
of the unit, etc.
The following chart shows the list of the menu
items.
Menu item
FS/BIT
TONE REC (S)
TONE REC (E)
REC STOP KEY
DEF. FILE NAME
MAX FILE NAME
AUTO CONT FILE
BATTERY
USB
IR REMOTE
SD FORMAT
RTC
RESET
VER
Menu operation
1. Press the [MENU] key for more than two seconds
while the recorder is stopped.
The unit enters the menu mode and the display
shows the menu item that was shown last time.
2. Select the desired menu item by pressing the
[MENU] key.
Pressing the "MENU" key for 2 seconds while
any of the menu items is displayed, the order of
displaying the menu items will become reversed.
Pressing the "MENU" key again for 2 seconds
will make the menu items back to the original
displaying order.
3. If the menu item is for selecting an option, select
the desired option using the [-/DOWN] and [+/
UP] keys.
If the menu item is for execution, follow the in-
structions on the display.
Using the menu
Description
Selects Fs/bit
Selects "Record start tone"
record mode
Selects "Record end tone"
recording mode
Selects key for record stop
Selects "default file name"
Selects maximum file size
"Auto continuous file" mode ON/OFF
Selects battery type
Selects USB connection mode
Selects infra-red controlled device
Formats SD card
Adjusts internal clock
Initializes menu item settings
Displays current version
Setting options
44/16, 48/16, 44/24,
48/24, 88/24, 96/24
OFF, ON(0s), ON(0.5s), ON(1s),
ON(1.5s), ON(2s), ON(3s)
OFF, ON(0s), ON(0.5s), ON(1s),
ON(1.5s), ON(2s), ON(3s)
REC, REC & STOP, STOP
SCENE, DC-R_
2G, 4G
ON, OFF
ALCALI, Ni-MH
OFF, PC, AUDIO
OFF, Canon
-
-
-
-
How to adjust RTC (Real Time Clock)
1. Enter the Menu and choose "RTC".
2. Pressing the "ENTER" key will go into the "RTC
SETUP" mode. The blinking digits here will be
Year.
3. Pressing the "ENTER" key in sequence will move
the blinking digits as the following order;
Year -> Month -> Day -> Hour -> Minute -> Second
4. While the digits you want to adjust are blinking,
use the "-/DOWN" key or "+/UP" key to set the
number.
5. Press the "EXIT" key to finish the setting and go
back to the Menu.
E-9
Default
44/16
OFF
OFF
REC
SCENE
2G
ON
ALCALI
OFF
OFF
-
-
-
-
Advertisement
Table of Contents
