Accurian Hdtv receiver Owner's Manual page 26

Set Up Antenna Input
How to select source input.
1.
2.
3.
26 Operating
If you have 8VSB cable service available, you will need to ask your cable provider which cable standard (STD, HRC,
or IRC) they are utilizing. In VERY LIMITED areas are there cable providers feeding 8VSB signal.
Call your local cable service provider to inquire about availability.
Select "Channel" in the Menu
Press the MENU button.
Press the / on the remote control to highlight
the "Channel" icon and press the or SEL button.
Select "Input Select"
Press the / button on the remote control to highlight
the "Input Select" icon and the press the
Select input type
Press the / button on the remote control to select
either "Air" for over-the-air DTV broadcasts or "Cable
(8VSB)" to receive DTV broadcast through cable.
or SEL button.