Advertisement
Available languages
Available languages
DM 2610944292 01-07
After changing the bits or making any other
adjustments, make sure the collet nut and
any other adjustment devices are securely
tightened. Loose adjustment of the tool can
cause it to unexpectedly shift, causing loss of
control, and loose rotating components will be
violently thrown.
Never touch the bit during or immediately
after use. Contact with the bit will cause injury
and after use the bit is too hot to be touched by
bare hands.
FIXED VISE
ASSEMBLY
BAR CLAMP
THUMBSCREW
SWIVEL BASE
ASSEMBLY
Accessories Included:
1. Tool Holder Adapter
2. Union Nut
3. Wrench
1/16/07
4:14 PM
Getting to Know Your Vise
Dremel Multi-Vise™
SOFT JAWS
SLIDE BAR
BASE NUT
Page 3
Do not leave a running tool unattended;
turn power off prior to leaving. Only when
the tool comes to a complete stop is it safe to
remove the tool.
THINK SAFETY! Safety is a combination of
operator COMMON SENSE and ALERTNESS
at all times when the tool is being used.
FIG. 1
BASE
THUMBSCREW
-3-
CLAMPING
SCREW HANDLE
SLIDE RELEASE
BUTTON
CLAMPING VISE
ASSEMBLY
Advertisement
