Gevalia CM-22 Series Care And Use Instructions Manual page 8

PROGRAMMING YOUR COFFEE MAKER – Automatic Operation
SETTING THE CLOCK
1. You may set the clock any time before or after brewing. The time on the clock must be set
prior to programming the Coffee Maker.
2. Press the HOUR and then the MIN buttons to set the current time. Press and hold the buttons
to scroll through numbers quickly. When the number displayed approaches the desired
setting, press and release the button to advance one digit at a time. Make sure the AM/PM
indicator is set properly.
Note: AM is indicated in the upper left hand corner of the LED digital clock/display and PM
in the lower left hand corner.
SETTING THE AUTO BREW START TIME
1. In order to use the Auto Brew feature, you must first set the clock. Please see instruction
above for setting the clock.
2. To set the desired Auto Brew start time, first press the PROGRAM button. The word
PROGRAM will begin flashing on the LED digital clock/display to indicate an Auto Brew
start time is being set.
3. Set the time you want the coffee to begin brewing by using the Hour and Min buttons,
following the same directions for setting the clock. Make sure the AM/PM indicator is set
properly.
Note: After setting the Auto Brew start time, the PROGRAM indicator will automatically
stop flashing after a few seconds and the display will return to the current time.
4. To confirm your Auto Brew start time, simply press the PROGRAM button and the pre-set
time will be displayed for a few seconds on the LCD digital clock/display. The PROGRAM
indicator will continue to flash while confirming the pre-set Auto Brew time. It will
automatically return to the current time after a few seconds.
5. After setting the Auto Brew start time, prepare the coffee following the directions in
preparation for use.
6. Press the AUTO ON button. The green Indicator Light encircling the button will illuminate
and the word AUTO will be displayed in the upper right hand corner of the LCD digital
clock/display.
7. Your Coffee Maker will automatically begin brewing at the pre-set time. When the brew
cycle begins, the green Indicator Light encircling the AUTO ON button will go out and the
red Indicator Light encircling the ON/OFF button will illuminate to indicate the Coffee Maker
is in operation.
8