Technical Specifications - HP 1810 Series Quickspecs

QuickSpecs

Technical Specifications

HP 1810-8G v2 Switch
(J9802A)
Ports
Physical characteristics
Memory and processor
Mounting
Performance
Environment
Electrical characteristics Voltage
Safety
Emissions
Immunity
DA - 13447 North America — Version 18 — January 17, 2014
8 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex:
10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
Supports a maximum of 8 autosensing 10/100/1000 ports
Dimensions
Weight
128 MB RAM, 8 MB flash; packet buffer size: 512 KB
wall, desktop and under table mounting
100 Mb Latency
1000 Mb Latency
Throughput
Switching capacity
MAC address table size
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Altitude
Acoustic
Current
Maximum power rating
Frequency
Notes
UL 60950-1; IEC 60950; EN 60950
EN 55022 Class A; CISPR 22 Class A; VCCI V-3; FCC (CFR 47, Part 15) Subpart B
Class A; VCCI V-4
ESD
Radiated
EFT/Burst
Surge
Conducted
HP 1810 Switch Series
7.93(w) x 4.65(d) x 1.73(h) in
(20.14 x 11.81 x 4.39 cm) (1U height)
0.84 lb (.38 kg)
< 3.3 µs (64-byte packets)
< 2.3 µs (64-byte packets)
up to 11.9 million pps
16 Gbps
8000 entries
32°F to 104°F (0°C to 40°C)
15% to 95% @ 104°F (40°C)
-40°F to 158°F (-40°C to 70°C)
15% to 95% @ 140°F (60°C)
up to 10,000 ft (3 km)
Power: 0 dB no fan
100-127/200-240 VAC
0.5 A
7.2 W
50/60 Hz
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all modules
populated.
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
Page 8